| Pouch |
|
Computerized Equipment, which comprises of three Servo Motors, the first to position the web, the second to move the sealing head, allowing a precise control in the time of seal, and the third to synchronize with the main motor to control the tension of the web.
When used as a cut and seal, it is adequate to manufacture flexible packages in Low and High density polyethylene, linear and polypropylene.
|
| Advantages |
One upper longitudinal sealing bar of 750 mm (29”), actuated by three pistons in a double station. One lower sealing bar of 750mm (29”), pneumatically actuated at beginning and ending of each cycle. One transversal lower sealing bar, 1100mm (43.3”) with a maximum web width of 1000mm (39.3”) pneumatically actuated at beginning and ending of each cycle. |
|
|
| Length |
9.500 mm |
| Width |
1.300 mm |
| Height |
1.850 mm |
| Web Width |
1.000 mm |
| Length of Auto. Receiving Table Op |
2.000 mm |
| Air Consumption at 06 Bar |
1.230 Nl/min |
| Installed Requirements |
13,5 Kw |
| Operational Requirements |
12,8 Kw |
| Voltage |
220 / 380 V |
| |
| Types of Seal |
 |
|
